 | Ball Joint Separator Kit 5pc (List Price £31.95 exc VAT) AK273 Ref: SAK273
• Three forged steel forks.
• Interchangeable shafts for use with ball pein hammer or air hammer with .401" shanks (Sealey GSA11, GSA12, SA11, SA12, SA611, SA612).
• Suitable for most small cars and light commercials.
Price: £16.45 (£19.74 Including: VAT at 20%)
|
|
|
 | Ball Joint Puller (List Price £11.75 exc VAT) AK380 Ref: SAK380
• Forged steel body with steel thrust bolt.
• Suitable for most small cars and light vans.
Price: £7.86 (£9.43 Including: VAT at 20%)
|
|
|
 | Ball Joint Remover (List Price £16.95 exc VAT) AK381 Ref: SAK381
• Chemically blackened forged steel body with thrust bolt.
• Suitable for most small cars and light vans.
Price: £10.83 (£13.00 Including: VAT at 20%)
|
|
|
 | Ball Joint Remover Adjustable (List Price £23.95 exc VAT) AK3811 Ref: SAK3811
• Forged steel body with chemically blackened thrust and adjustment screws for corrosion resistance.
• Fully adjustable.
Price: £12.74 (£15.29 Including: VAT at 20%)
|
|
|
 | Ball Joint Separator (List Price £10.45 exc VAT) AK382 Ref: SAK382
• Forged steel body with satin finish.
• Suitable for most small cars and light vans.
Price: £6.87 (£8.24 Including: VAT at 20%)
|
|
|
 | Ball Joint Separator Long Reach 400mm (List Price £11.95 exc VAT) AK3821 Ref: SAK3821
• Drop-forged and heat treated alloy steel.
• Suitable for applications with awkward or limited access.
Price: £6.36 (£7.63 Including: VAT at 20%)
|
|
|
 | Lower Ball Joint Socket Peugeot 405/Citroen (List Price £12.95 exc VAT) SX027 Ref: SSX027
• Heat treated alloy steel socket.
• 35mm Hex drive with Ø19mm internal clearance for OEM and non OEM fittings.
• Ø50mm Ring with drive pegs which locate in slots cut in the ball joint flange.
• Suitable for Peugeot 405 and Citroen lower ball joints.
Price: £6.89 (£8.27 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Lower Ball Joint Socket Set 2pc (List Price £29.95 exc VAT) SX0271 Ref: SSX0271
• Set of two heat treated alloy steel sockets.
• Suitable for removal of OEM and aftermarket lower ball joints on Peugeot and Citroen vehicles.
• Supplied in carry-case.
Price: £19.73 (£23.68 Including: VAT at 20%)
|
|
|
 | Mercedes Lower Ball Joint Remover/Installer (List Price £274.95 exc VAT) VS1272 Ref: SVS1272
• Suitable for the in situ removal and installation of front lower ball joints on W220, W211 and W230 Mercedes.
• No need to disassemble.
• Includes all necessary adaptors and supplied in carry-case.
• Use with ratchet wrench.
Price: £168.08 (£201.70 Including: VAT at 20%)
|
|
|
 | Ball Joint Removal Set 3pc (List Price £99.95 exc VAT) VS3800 Ref: SVS3800
• Low profile set suitable for most modern vehicles.
• Three sizes of jaw allow use on most cars and light commercial vehicles.
• Features heavy-duty forged steel body and hardened screw with thrust ball.
• Supplied in storage case.
Price: £65.22 (£78.26 Including: VAT at 20%)
|
|
|
 | Ball Joint Removal Tool 23-55mm (List Price £44.95 exc VAT) VS3801 Ref: SVS3801
• Low profile design with heavy-duty forged steel body.
• Suitable for modern vehicle applications where restricted access is a problem.
• Includes hardened screw and thrust ball for added power.
Price: £23.15 (£27.78 Including: VAT at 20%)
|
|
|
 | Ball Joint Removal Tool 28-55mm (List Price £45.95 exc VAT) VS3802 Ref: SVS3802
• Low profile design with heavy-duty forged steel body suitable for modern vehicle applications where restricted access is a problem.
• Includes hardened screw and thrust ball for added splitting power.
Price: £23.66 (£28.39 Including: VAT at 20%)
|
|
|
 | Ball Joint Removal Tool 34mm (List Price £46.95 exc VAT) VS3803 Ref: SVS3803
• Low profile design with heavy-duty forged steel body suitable for modern vehicle applications where restricted access is a problem.
• Includes hardened screw and thrust ball for added splitting power.
Price: £24.18 (£29.02 Including: VAT at 20%)
|
|
|
 | Ball Joint Extractor 30mm (List Price £99.95 exc VAT) VS3804 Ref: SVS3804
• Chemically blackened forged steel body with thrust bolt.
• High strength construction, suitable for commercial vehicle ball joints.
Price: £72.06 (£86.47 Including: VAT at 20%)
|
|
|
 | Ball Joint Extractor 39mm (List Price £139.95 exc VAT) VS3805 Ref: SVS3805
• Chemically blackened forged steel body with thrust bolt.
• High strength construction, suitable for splitting commercial vehicle ball joints.
Price: £100.90 (£121.08 Including: VAT at 20%)
|
|
|
 | Ball Joint Splitter - HGV Lever Type (List Price £144.95 exc VAT) VS3812 Ref: SVS3812
• Chemically blackened forged steel body with thrust bolt.
• Suitable for HGV applications.
Price: £74.65 (£89.58 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Ball Joint Splitter Hydraulic & Manual - HGV (List Price £199.95 exc VAT) VS3813 Ref: SVS3813
• Heavy-duty ball joint splitter suitable for HGV vehicles.
• Specially designed to be operated manually or by 12tonne hydraulic ram supplied.
• Features a step down thread adaptor that allows fitting of the manual thrust screw or hydraulic ram.
• Hydraulic ram interchangeable with Model No. PS990.
• Supplied in carry-case.
Price: £138.41 (£166.09 Including: VAT at 20%)
|
|
|
 | Hydraulic Ball Joint Installation/Removal Kit - BMW (List Price £279.95 exc VAT) VSE127H Ref: SVSE127H
• Essential time and money saver, remove and install press-fit control arm ball joints on BMW 3 Series E36 vehicles.
• MOT Specific application.
• Use in-situ, there is no requirement to remove the control arm from the vehicle.
• Includes all necessary adaptors.
• Simple, easy hydraulic ram action.
Price: £190.45 (£228.54 Including: VAT at 20%)
|
|
|
 | Ball Joint Removal/Installation Set - Mercedes Sprinter (List Price £49.95 exc VAT) VSE127H05 Ref: SVSE127H05
• For use in conjunction with Sealey Hydraulic Ball Joint Removal/Installer Kit (Model No. VSE127H).
• Essential tool for removal/installation of the front lower ball joint in-situ.
• Includes all necessary adaptors.
Price: £36.01 (£43.21 Including: VAT at 20%)
|
|
|
 | BMW Rear Ball Joint Tool (List Price £149.95 exc VAT) VSE5509 Ref: SVSE5509
• Designed to remove and install press-fit rear suspension ball joints in situ, on BMW 5 and 7 Series.
• These joints are sometimes referred to as 'bushes' but are true ball joints.
Price: £98.85 (£118.62 Including: VAT at 20%)
|
|
|
 | Front Axle Upper Ball Joint Extractor/Installer - VW T4 (List Price £229.95 exc VAT) VSE725 Ref: SVSE725
• Suitable for removing and installing the upper front ball joint in-situ without the need to disassemble.
• Features a variety of adaptors used in different combinations for extracting and installing.
• Supplied in a carry-case with each part numbered for simple selection.
Price: £156.43 (£187.72 Including: VAT at 20%)
|
|
