 | Trailing Arm Bush Removal/Installation Tool - Vauxhall/Opel Vectra (List Price £188.95 exc VAT) VS4460 Ref: SVS4460
• Allows the upper and lower damping bushes in the trailing arm to be removed, and new bushes installed, in situ, without removing the trailing arm from the car.
Price: £126.50 (£151.80 Including: VAT at 20%)
|
|
|
 | Trailing Arm Bush Removal/Installation Tool - BMW (List Price £298.45 exc VAT) VS4464 Ref: SVS4464
• Remove/Install, in situ, the upper and lower damping bushes on the rear trailing arm of BMW 3 Series.
• The bush design has been changed and this tool will remove both old and new bushes, and will install the new slotted bushes.
Price: £188.53 (£226.24 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Rear Subframe Bush Removal/Installation Tool Kit - BMW (List Price £419.95 exc VAT) VS4465 Ref: SVS4465
• Enables the axle bush to be removed and a replacement installed in situ, without the need to disassemble the rear axle carrier.
• The kit includes a main removal frame that is used together with combinations of adaptors and removal plates.
• Combinations of installer plates and thrust plate are used to install the new bush.
Price: £255.50 (£306.60 Including: VAT at 20%)
|
|
|
 | Bush Installation/Removal Tool Kit - Vauxhall/Opel Vectra (List Price £82.95 exc VAT) VS720 Ref: SVS720
• Tool kit for removing/installing upper and lower rear trailing arm bushes on Vauxhall/Opel Vectra (95-02).
• Bushes are easily pressed in or out with tool and a 19mm ratchet wrench (not included).
Price: £42.72 (£51.26 Including: VAT at 20%)
|
|
|
 | Bush Installation/Removal Tool Kit - Vauxhall/Opel Vectra - Rapid (List Price £89.95 exc VAT) VS721 Ref: SVS721
• Alternative version of VS720 intended for rapid removal/installation of Vauxhall/Opel Vectra (95-02) upper and lower rear trailing arm bushes.
• Bushes are quickly pressed in or out with tool and a 19mm ratchet wrench (not included).
Price: £46.32 (£55.58 Including: VAT at 20%)
|
|
|
 | Rear Bush Installation Tool - VW Golf IV Audi A3 (List Price £99.95 exc VAT) VS722 Ref: SVS722
• Suitable for the in-situ installation of the rear axle mounting bushes on selected VW and Audi vehicles.
• Use with ratchet wrench or spanner to insert composite bushes.
• Supplied in storage case.
Price: £51.47 (£61.76 Including: VAT at 20%)
|
|
|
 | Bush Removal Adaptor Set - VW Golf MkIII (List Price £62.95 exc VAT) VSE127H01 Ref: SVSE127H01
• For use in conjunction with Sealey Hydraulic Ball Joint Remover/Installer kit (Model No. VSE127H).
• Set contains various adaptors for rear axle bush removal on VW Golf MKIII (92-00).
Price: £45.39 (£54.47 Including: VAT at 20%)
|
|
|
 | Bush Removal Adaptor Set - Renault Laguna (List Price £52.95 exc VAT) VSE127H02 Ref: SVSE127H02
• For use in conjunction with Sealey Hydraulic Ball Joint Remover/Installer Kit (Model No. VSE127H).
• Set contains various adaptors for front ball joint removal/installation on Renault Laguna (93-00).
Price: £38.18 (£45.82 Including: VAT at 20%)
|
|
|
 | Bush Removal Adaptor Set - VW Golf IV, Audi A2, A3 (List Price £125.95 exc VAT) VSE127H03 Ref: SVSE127H03
• For use in conjunction with Sealey Hydraulic Ball Joint Remover/Installer Kit (Model No. VSE127H).
• Set contains various adaptors for rear axle bush removal on VW Golf IV, Audi A2, A3 (97-03).
Price: £90.81 (£108.97 Including: VAT at 20%)
|
|
|
 | Bush Removal Adaptor Set - BMW E30 (List Price £36.95 exc VAT) VSE127H04 Ref: SVSE127H04
• For use in conjunction with Sealey Hydraulic Ball Joint Remover/Installer Kit (Model No. VSE127H).
• Set contains various adaptors for rear bush removal on BMW E30 (83-94).
Price: £26.64 (£31.97 Including: VAT at 20%)
|
|
|
 | Bush Removal Tool - Renault Laguna (List Price £179.95 exc VAT) VSE4777 Ref: SVSE4777
• Remove/Install front mounting bushes in Laguna rear sub-frame.
• Can be used in situ - no need to remove sub-frame from vehicle.
• Supplied in carry-case.
Price: £92.67 (£111.20 Including: VAT at 20%)
|
|
|
 | Bush Removal Tool - Ford Mondeo (List Price £131.95 exc VAT) VSE4778 Ref: SVSE4778
• Remove/Install rear sub-frame bushes in Mondeo.
• Can be used in situ - no need to remove sub-frame from vehicle.
• Supplied in carry-case.
Price: £67.95 (£81.54 Including: VAT at 20%)
|
|
|
 | Rear Axle Bush Tool - Ford Fiesta IV, Ka (List Price £142.95 exc VAT) VSE4779 Ref: SVSE4779
• Remove/Install Fiesta IV rear axle mounting bushes.
• Can be used in situ - no need to remove trailing link assembly from vehicle.
• Supplied in carry-case.
Price: £73.62 (£88.34 Including: VAT at 20%)
|
|
|
 | Rear Bush Tool - Ford Focus MK1 1998-2004 (List Price £199.95 exc VAT) VSE4780 Ref: SVSE4780
• Remove/install rear sub-frame bushes on Ford Focus.
• Can be used in situ - no need to remove sub-frame from vehicle.
Price: £144.16 (£172.99 Including: VAT at 20%)
|
|
|
 | Front Suspension Bush Tool - VAG (List Price £129.95 exc VAT) VSE4781 Ref: SVSE4781
• Suitable for the removal/installation of the rear mounting bush on the front lower wish-bone.
• Can be used in-situ without removing the aluminium housing.
• Use with 24mm spanner only.
• Supplied in carry-case.
Price: £66.92 (£80.30 Including: VAT at 20%)
|
|
|
 | Rear Axle Bush Removal Tool Set - BMW (E36, E46) - 3 Series (List Price £309.95 exc VAT) VSE5613 Ref: SVSE5613
• Remove/Install all three rear axle bushes on E36 and E46 BMW 3 Series.
• Features a variety of adaptors and plates used in various combinations for extracting and installing old/new bushes.
• Suitable for in situ operation. Presented in a carry-case with each part numbered for simple selection.
Price: £210.86 (£253.03 Including: VAT at 20%)
|
OUT OF STOCK |
