 | TRX-Star Socket Bit T55 x 100mm Long 1/2"Sq Drive (List Price £8.45 exc VAT) AK552 Ref: SAK552
• 1/2"Sq Drive satin finish Chrome Vanadium steel socket with knurled ring. 100mm S2 Steel shaft.
• Suitable for Ford cylinder head bolts on V6 and OHC engines from 1985 onwards.
• Also fits differential filler plug on Sierra and Scorpio.
Price: £4.49 (£5.39 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Spline Socket Bit M14 Long 1/2"Sq Drive (List Price £11.95 exc VAT) AK5531 Ref: SAK5531
• 1/2"Sq Drive satin finish Chrome Vanadium steel socket with knurled ring. 100mm S2 Steel shaft.
• Suitable for Rover 800 2.5D cylinder head bolts and VW Type 4 Transporter bottom wishbone bolts.
Price: £6.36 (£7.63 Including: VAT at 20%)
|
|
|
 | Head Bolt Socket Bit Set 8pc 1/2"Sq Drive (List Price £66.95 exc VAT) AK5538 Ref: SAK5538
• Head bolt removal tools, long reach suitable for modern engines.
• Seven drop-forged Chrome Vanadium steel sockets with S2 steel male bits, and one single piece Chrome Vanadium TRX-Star* deep socket.
• Sockets heat treated and chrome plated with satin finish for resistance to corrosion.
• Knurled ring on sockets to assist gripping with oily fingers.
• Suitable for Audi, BMW, Fiat, Ford, Mazda, Mercedes, Nissan, Renault and Rover vehicles.
• Supplied in storage case.
Price: £34.48 (£41.38 Including: VAT at 20%)
|
|
|
 | TRX-Star Female Socket Set Extra Deep 150mm 1/2"Sq Drive (List Price £49.95 exc VAT) AK5539 Ref: SAK5539
• Forged Chrome Vanadium single piece steel deep sockets.
• Heat treated and chrome plated with satin finish for resistance to corrosion.
• Spring-ball retention holds fixing for easy installation/removal.
• Suitable for cylinder head bolts on BMW & Mercedes CDI engines.
• Supplied in carry-case.
Price: £25.72 (£30.86 Including: VAT at 20%)
|
|
|
 | Ribe Socket Bit M9 x 100mm 1/2"Sq Drive (List Price £6.45 exc VAT) SX110 Ref: SSX110
• 1/2"Sq Drive satin finished Chrome Vanadium steel socket with knurled ring.
• S2 Steel bit.
• Suitable for Passat cylinder head bolts.
Price: £3.43 (£4.12 Including: VAT at 20%)
|
|
|
 | Precision Straight Edge (List Price £129.95 exc VAT) VS1480 Ref: SVS1480
• Suitable for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds.
• May be used with feeler gauges for high precision work.
• Supplied in storage case.
Price: £88.96 (£106.75 Including: VAT at 20%)
|
|
|
 | Technician's Straight Edge (List Price £59.95 exc VAT) VS1481 Ref: SVS1481
• Suitable for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds.
• May be used with feeler gauges for high precision work.
• Features peg hole for easy storage.
• Supplied with protective edging for when not in use.
Price: £30.87 (£37.04 Including: VAT at 20%)
|
|
|
 | Valve Spring Compressor - Ford CVH (List Price £15.95 exc VAT) VS150 Ref: SVS150
• Permits valve stem seal and valve spring replacement without the need to remove the cylinder head.
• Superior cast design with radiused fulcrum for smooth spring compression.
• Suitable for CVH Ford engines 1.3, 1.4 and 1.6 as fitted to Escort (inc. XR3i and RS Turbo), Fiesta (inc. RS Turbo) and Orion.
Price: £8.48 (£10.18 Including: VAT at 20%)
|
|
|
 | Rocker Arm & Valve Compensator Tool (List Price £16.95 exc VAT) VS151 Ref: SVS151
• Suitable for use on Vauxhall/Opel OHC engines.
• Permits quick, on vehicle, removal of rocker arm and valve play compensator.
• Mounts on camshaft housing.
• Cast construction with knurled hex head fixing.
Price: £9.01 (£10.81 Including: VAT at 20%)
|
|
|
 | Valve Spring Compressor OHV (List Price £28.95 exc VAT) VS152 Ref: SVS152
• Suitable for most small and medium sized OHV engines.
• Fully adjustable jaw with 75-165mm capacity and 150mm throat depth.
• Parallel lift action with automatic lock.
Price: £15.40 (£18.48 Including: VAT at 20%)
|
|
|
 | Valve Spring Compressor OHC/OHV/CVH (List Price £36.95 exc VAT) VS153 Ref: SVS153
• Suitable for most small and medium sized OHC engines and also for general use on OHV and CVH engines.
• Universal jaw with 60-155mm capacity and 160mm throat depth.
• Parallel lift action with automatic lock.
Price: £24.68 (£29.62 Including: VAT at 20%)
|
|
|
 | Valve Spring Compressor - Multi Valve (List Price £54.95 exc VAT) VS154 Ref: SVS154
• Suitable for use on multi valve petrol and diesel engines with deep-seated valves.
• Suitable also for general use on OHC, OHV and CVH engines.
• Universal jaw with 55-175mm capacity and 165mm throat depth.
• Reversible jaw and adaptor.
• Twin cam action permits use from above or below valve.
Price: £28.30 (£33.96 Including: VAT at 20%)
|
|
|
 | Cylinder Head Stands (List Price £25.95 exc VAT) VS1555 Ref: SVS1555
• A pair of support stands which locate into cylinder head via stud holes.
• Also provides the clearance between head and workbench required when reaming valve guides.
Price: £15.77 (£18.92 Including: VAT at 20%)
|
|
|
 | Valve Spring Compressor OHV (List Price £29.95 exc VAT) VS160 Ref: SVS160
• Permits valve springs and valve stem oil seals to be replaced without the need to remove the cylinder head when used in conjunction with VS1601 Compressed Air Adaptor.
• Reversible jaw adaptor and automatic cam action lock to pre-set spring tension.
• Suitable for use on a wide range of OHV, OHC and CVH engines.
• Note: Not suitable for engines with deep-seated valves.
Price: £15.42 (£18.50 Including: VAT at 20%)
|
|
|
 | Compressed Air Adaptor Use with VS160 (List Price £8.95 exc VAT) VS1601 Ref: SVS1601
• Use with the VS160 to hold the valves closed whilst spring is compressed.
• Spark plug adaptor with M14 and M18 threaded fittings for car and light commercial use.
• Valve assembly maintains cylinder pressure when air supply is cut.
• Requires a 90-125psi supply.
• Fitted with standard bayonet air line coupling.
Price: £4.76 (£5.71 Including: VAT at 20%)
|
|
|
 | Valve Collet Installer/Remover 16/24Valve (List Price £12.95 exc VAT) VS1651 Ref: SVS1651
• Spring loaded shaft and clips aid simple and secure installation of valve spring collets.
• Quick and easy retrieval of lost collets using magnetic tip.
• Suitable for 16 and 24 valve engines.
• Ideal for use on heads with recessed valves.
Price: £6.89 (£8.27 Including: VAT at 20%)
|
|
|
 | Valve Grinder Set 2pc (List Price £9.95 exc VAT) VS1653 Ref: SVS1653
• Set of two valve grinders with wooden shafts.
• Suitable for grinding-in most engine valves.
• Features three sizes of rubber suction cup.
Price: £5.29 (£6.35 Including: VAT at 20%)
|
|
|
 | Valve Stem Seal Pliers Long Stem Straight 16/24Valve (List Price £28.95 exc VAT) VS1671 Ref: SVS1671
• Steel pliers with insulated handles.
• Long stem aids removal and installation of valve stem seals on 16 and 24 valve OHC engines.
• Serrated tips aid grip.
• Especially suited to stubborn seals.
Price: £15.40 (£18.48 Including: VAT at 20%)
|
|
|
 | Valve Spring Compressor Lever Type OHV/OHC (List Price £36.95 exc VAT) VS168 Ref: SVS168
• Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head.
• Use in conjunction with VS1601 compressed air adaptor.
• Adjustable handle, claws and hooks allow use on most OHV engines.
• Note: Not suitable for vehicles with deep-seated valves.
Price: £19.03 (£22.84 Including: VAT at 20%)
|
|
|
 | Professional Cylinder Head Service Kit 20pc (List Price £199.95 exc VAT) VS169 Ref: SVS169
• Complete upper engine service kit enables in situ removal and replacement of valve springs and guides/bushings.
• Suitable for 8, 16 and 24 valve engines.
• Supplied in carry-case.
Price: £123.57 (£148.28 Including: VAT at 20%)
|
|
|
 | Decarbonising Brush Set 2pc 13mm (List Price £5.95 exc VAT) VS1801 Ref: SVS1801
• Brassed and crimped steel brushes with flat and pointed fill.
• Suitable for decarbonising cylinder head ports and components.
• Ø6x35mm Shanks.
Price: £3.16 (£3.79 Including: VAT at 20%)
|
|
|
 | Valve Seat Cutter (List Price £499.95 exc VAT) VS1823 Ref: SVS1823
• Suitable for re-cutting inlet/exhaust valve seats concentric to the valve guides.
• Features tungsten carbide cutting blades, expandable pilots and double end cutters for increased application.
• Supplied in storage case.
Price: £350.96 (£421.15 Including: VAT at 20%)
|
|
|
 | Ribbed Crankshaft/Auxiliary Pulley Remover (List Price £79.95 exc VAT) VS785 Ref: SVS785
• Designed for removal of stubborn or seized ribbed crankshaft and auxiliary pulleys, without the risk of damage.
• Suitable for most vehicles.
• Low profile arms allow use in restricted engine bays.
Price: £54.35 (£65.22 Including: VAT at 20%)
|
|
