 | Code Breaker Manual (List Price £59.95 exc VAT) CBM Ref: SCBM
• Comprehensive book giving references and definitions for over 2700 EOBD/ISO codes.
• Provides guidance for many diagnostic procedures and checks, when a fault code has been retrieved.
• Applicable for a wide range of vehicle makes and models.
PLEASE NOTE: THIS PRODUCT IS ZERO RATED FOR VAT
The VAT inclusive price indicated is system generated
Price: £46.31 (£55.57 Including: VAT at 20%)
|
|
|
 | Remote Starter Switch (List Price £13.95 exc VAT) VS205 Ref: SVS205
• Makes one man operation possible for a variety of under the bonnet tasks.
• Connects to starter system with leads provided and allows push button turnover of engine.
• Supplied with 1.5mtr cable.
Price: £7.42 (£8.90 Including: VAT at 20%)
|
|
|
 | Remote Starter Switch (List Price £49.95 exc VAT) VS2057 Ref: SVS2057
• One-man operation, suitable for turning the engine over for various diagnostic tasks such as compression testing.
• Connects to the starter system with push button activation.
• Features a connectivity LED and 1.5mtr cable.
Price: £30.87 (£37.04 Including: VAT at 20%)
|
|
|
 | Throttle Potentiometer Tester (List Price £99.95 exc VAT) VS215 Ref: SVS215
• Fast diagnosis of a common electronic fault.
• Simple to use digital meter indicates throttle position sensor output voltage.
• Connect to battery terminals and sensor signal wire and digital display will show output voltage as a percentage.
• Supplied in foam lined storage case.
Price: £54.35 (£65.22 Including: VAT at 20%)
|
|
|
 | VAG Code Reader & Reset Tool - EOBD & Generic (List Price £259.95 exc VAT) VS862 Ref: SVS862
• Hand-held controller, suitable to work with VAG vehicles including those equipped with Controller Area Network (CAN) protocol.
• Back-lit LCD display with simple to follow menu-driven software.
• Reads and clears diagnostic trouble codes (DTCs) for engine, ABS, airbags, transmission, radio, climate control (A/C), steering wheel and immobilizer vehicle modules.
• Also resets oil service light (including Long Life), retrieves vehicle information (VIN), displays I/M readiness status and OBDII freeze frame data.
• Turns off malfunction indicator lamp (MIL) for engine, airbag, ABS and automatic transmission.
• Supplied in storage pouch with EOBD and USB cables.
• Fully updatable from the internet. Optional connector lead available for 2-pin VAG applications - Model No. VS8X01
Price: £176.84 (£212.21 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Electronic Parking Brake Service Tool (List Price £199.95 exc VAT) VS8622 Ref: SVS8622
• Suitable for safe and professional replacement of brake pads on vehicles fitted with an electronic parking brake (EPB).
• Plugs into the vehicle's EOBD socket and reads/clears EPB fault codes.
• Features large, easy to read LCD screen and intuitive controls.
• Integral USB socket allows update via the internet.
• Deactivates/activates SBC (Sensotronic Brake Control).
• Controls brake bleeding and inspects for air in the braking system on SBC compliant vehicles.
• Supplied with USB cable and software CD ROM in storage pouch.
Price: £138.41 (£166.09 Including: VAT at 20%)
|
|
|
 | Service Reset Tool with Oil Degradation Function - Fiat (List Price £179.95 exc VAT) VS8623 Ref: SVS8623
• Alfa Romeo, Fiat and Lancia oil service and oil degradation reset tool.
• Compatible with the latest Fault Tolerant CAN vehicles.
• Designed to extinguish the oil service light and to show if there is a fault on the CAN bus which is a common problem with these vehicles.
Price: £129.74 (£155.69 Including: VAT at 20%)
|
|
|
 | Service Indicator & EPB Reset Tool - Land Rover/Range Rover (List Price £179.95 exc VAT) VS8624 Ref: SVS8624
• Essential tool for extinguishing service indicator and resetting Electronic Parking Brake on Land Rover and Range Rover vehicles.
• Simple push button operation allows EPB cable to be released and re-attached and, in the event that the emergency hand brake has been activated, allows the user to reset the system, clears codes that may have been generated as a result of the emergency cable being pulled.
• It also allows the EPB to be un-jammed when the vehicle has entered a state of brake screech when applying the parking brake, the rear brakes squeak or rub when the vehicle is moving or there is evidence of shoe-drag.
• Powered by connection to the vehicle.
Price: £129.74 (£155.69 Including: VAT at 20%)
|
|
|
 | Service Light & EPB Reset Tool - Volvo (List Price £179.95 exc VAT) VS8625 Ref: SVS8625
• Designed for resetting electronic parking brake (EPB) and extinguishing the service interval lights, including the service interval messages that are displayed in the Driver Information Module after carrying out routing maintenance on Volvo vehicles.
• Simple push button application.
• Powered by connection to the vehicle.
Price: £129.74 (£155.69 Including: VAT at 20%)
|
|
|
 | DPF Regeneration & Additive Light Tool - Peugeot/Citroen (List Price £179.95 exc VAT) VS8626 Ref: SVS8626
• Essential tool for extinguishing the Particulate Filter Light after the filter has been replaced.
• Resets the ELOYS additive after it has been topped up.
• Burns any particles that have clogged the filters (Regenerate).
• Powered by connection to the vehicle.
Price: £129.74 (£155.69 Including: VAT at 20%)
|
|
|
 | EOBD Code Reader & Reset Tool - Renault/PSA (List Price £399.95 exc VAT) VS863 Ref: SVS863
• Sophisticated hand-held scanning tool enables fast and easy access to engine based EOBD DTCs with the added versatility of reading and clearing airbag, ABS and transmission DTCs on Citroen, Peugeot and Renault vehicles from ’96 to 2007.
• The VS863 gives clear, concise DTC definitions on its large back-lit LCD screen.
• This CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Unit then turns off MIL light, clears codes and resets monitors.
• Unit also stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Additionally, this tool will read and display the live ECU/PCM data stream, plotting selected functions graphically.
• It will give a live display of O2 sensor data and has a memory which enables on and off-line storage and playback of data.
• A built-in data library with lookup functions is also included.
• The tool is updateable via web-based downloads over the USB cable included with the scanner and will link with a PC enabling the print-out of stored data.
• Supplied in storage pouch.
• Powered by 4 x AA batteries.
Price: £262.05 (£314.46 Including: VAT at 20%)
|
|
|
 | US Vehicle Code Reader & Reset Tool - Chrysler/Ford/Vauxhall/Opel (List Price £399.95 exc VAT) VS864 Ref: SVS864
• Sophisticated hand-held scanning tool enables fast and easy access to engine based EOBD DTCs with the added versatility of reading and clearing airbag, ABS and transmission DTCs on Chrysler, Ford and GM vehicles from ’84on.
• The VS864 gives clear, concise DTC definitions on its large back-lit LCD screen.
• This CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Unit then turns off MIL light, clears codes and resets monitors.
• Unit also stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Additionally, this tool will read and display the live ECU/PCM data stream, plotting selected functions graphically.
• It will give a live display of O2 sensor data and has a memory which enables on and off-line storage and playback of data.
• A built-in data library with lookup functions is also included.
• The tool is updateable via web-based downloads over the USB cable included with the scanner and will link with a PC enabling the print-out of stored data.
• Supplied in storage pouch.
• Powered by 4 x AA batteries.
Price: £262.05 (£314.46 Including: VAT at 20%)
|
|
|
 | EOBD Code Reader & Reset Tool - Japanese (List Price £399.95 exc VAT) VS865 Ref: SVS865
• Sophisticated hand-held scanning tool enables fast and easy access to engine based EOBD DTCs with the added versatility of reading and clearing airbag, ABS and transmission DTCs on Japanese vehicles from ’96 to 2007.
• The VS865 gives clear, concise DTC definitions on its large back-lit LCD screen.
• This CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Unit then turns off MIL light, clears codes and resets monitors.
• Unit also stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Additionally, this tool will read and display the live ECU/PCM data stream, plotting selected functions graphically.
• It will give a live display of O2 sensor data and has a memory which enables on and off-line storage and playback of data.
• A built-in data library with lookup functions is also included.
• The tool is updateable via web-based downloads over the USB cable included with the scanner and will link with a PC enabling the print-out of stored data.
• Supplied in storage pouch.
• Powered by 4 x AA batteries.
Price: £262.05 (£314.46 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Euro Vehicle Code Reader & Reset Tool (List Price £399.95 exc VAT) VS8650 Ref: SVS8650
• Sophisticated hand-held scanning tool enables fast and easy access to engine based EOBD DTCs with the added versatility of reading and clearing airbag, ABS and transmission DTCs on VW/Audi, BMW/Mini, Mercedes, Volvo and Vauxhall from varying start dates (see table).
• The VS8650 gives clear, concise DTC definitions on its large back-lit LCD screen.
• This CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Unit then turns off MIL light, clears codes and resets monitors.
• Unit also stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Additionally, this tool will read and display the live ECU/PCM data stream, plotting selected functions graphically.
• It will give a live display of O2 sensor data and has a memory which enables on and off-line storage and playback of data.
• A built-in data library with lookup functions is also included.
• The tool is updateable via web-based downloads over the USB cable included with the scanner and will link with a PC enabling the print-out of stored data.
• Supplied in storage pouch.
• Requires 4 x AA batteries (supplied).
Price: £262.05 (£314.46 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Oil & Service Reset Tool (List Price £259.95 exc VAT) VS8651 Ref: SVS8651
• Designed for resetting the oil service and oil inspection lights, and for adjusting service interval data on a wide range of common vehicles.
• Resets airbag light on selected vehicles.
• Intuitive controls and easy to follow LCD menu screen.
• Supplied with EOBD connector, USB cable and adaptors for older BMW, VW and Mercedes.
• Updateable via internet.
Price: £176.84 (£212.21 Including: VAT at 20%)
|
|
|
 | EOBD Code Reader (List Price £64.95 exc VAT) VS8699 Ref: SVS8699
• Competitively priced EOBD tool.
• The VS8699 works with all 1996 and later OBDII / EOBD compliant vehicles.
• This easy to use tool will retrieve/clear generic and manufacturer Diagnostic Trouble Codes (DTC).
• Supplied with a comprehensive instruction and code reference manual.
Price: £29.62 (£35.54 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | EOBD Code Reader (List Price £94.95 exc VAT) VS8700 Ref: SVS8700
• Small, powerful and advanced, the VS8700 gives users fast and easy access to any vehicle’s EOBD diagnostic codes and enables the cause of the illuminated engine check light (MIL) to be established.
• No need for separate books or lookup-tables, the VS8700 gives clear, concise DTC definitions generic to all EOBD compliant vehicles on screen.
• This CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Unit then turns off MIL light, clears codes and resets monitors.
• Unit also stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Features large easy to read backlight display and intuitive controls.
• Supplied with operating instructions.
Price: £68.46 (£82.15 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | EOBD Code Reader - Memory & Graphics (List Price £274.95 exc VAT) VS8701 Ref: SVS8701
• Sophisticated and powerful yet simple to use, the VS8701 enables fast and easy access to any vehicle’s EOBD diagnostic codes and enables the cause of the illuminated engine check light (MIL) to be established.
• The VS8701 gives clear, concise DTC definitions generic to all EOBD compliant vehicles on screen.
• This CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Unit then turns off MIL light, clears codes and resets monitors.
• Unit also stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
• Additionally, this tool will read and display the live ECU/PCM data stream, plotting selected functions graphically.
• It will give a live display of O2 sensor data and has a memory which enables on and off-line storage and playback of data.
• A built-in data library with lookup functions is also included.
• The tool is updateable via web-based downloads over the USB cable included with the scanner and will link with a PC enabling the print-out of stored data.
• Supplied in storage pouch.
• Requires 1 x 9V Battery.
Price: £187.05 (£224.46 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | EOBD Code Reader (List Price £129.95 exc VAT) VS8702 Ref: SVS8702
• Small and powerful with features from more advanced tools on the market, the VS8702 gives users fast and easy access to any vehicle’s EOBD diagnostic codes and enables the cause of the illuminated engine check light (MIL) to be established.
• No need for separate books or lookup-tables, the VS8702 gives clear, concise DTC definitions generic to all EOBD compliant vehicles on screen.
• This CAN enabled tool, retrieves generic P0, P2 and P3 and U10 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes.
• Unit then turns off MIL light, clears codes and resets monitors.
• Unit gives access to live data streams from the engine and power train modules and also stores freeze frame data for later evaluation.
• The unit will also display monitor and I/M readiness status.
• Features large, easy to read backlight display and intuitive controls.
• Supplied with operating instructions.
Price: £93.69 (£112.43 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Adaptor Lead 2-Pin Connector - VAG 2x2 (List Price £24.95 exc VAT) VS8X01 Ref: SVS8X01
• Adaptor lead for 2-pin VAG applications.
• Suitable for use with VS862.
Price: £19.27 (£23.12 Including: VAT at 20%)
|
|
|
 | IR & RF Key Fob Tester (List Price £37.95 exc VAT) VS921 Ref: SVS921
• Detects and confirms radio frequency and/or infrared emission from key fobs and remote controls.
• Helps diagnose faults quickly and easily without the need to dismantle the fob, remote or vehicle.
• Magnetic backing sticks to the side of any ferrous surface making distance test of transmitter a possibility.
• Suitable for a wide variety of vehicle and electronic/electrical applications.
• Suitable for detecting new BMW frequencies.
• Powered by 9V battery (not included).
Price: £23.45 (£28.14 Including: VAT at 20%)
|
|
|
 | Lambda Sensor Tester/Simulator (List Price £179.95 exc VAT) VS925 Ref: SVS925
• Tests Zirconia and Titania lambda sensors and ECU. Suitable for 1, 2, 3 and 4 wire sensors, heated and unheated.
• LED display shows crossover signal from sensor.
• Simulates rich or lean mixture signals to check ECU response.
• Insulation-piercing clip for quick and easy connection plus display to confirm wire identity.
• Powered by 9V battery (not supplied) and has low battery indicator.
Price: £69.18 (£83.02 Including: VAT at 20%)
|
|
