 | Franklin Tools HD CV Boot Clamp Pliers (AF576) Ref: FRAF576
HD CV Boot Clamp Pliers
Price: £36.98 (£44.38 Including: VAT at 20%)
|
|
|
 | Franklin Tools Consumable Spare Kit AFT42 (10421) Ref: FR10421
Price: £26.12 (£31.34 Including: VAT at 20%)
|
|
|
| | Franklin Tools Consumable Spare Kit AFT43 (10431) Ref: FR10431
Price: £24.29 (£29.15 Including: VAT at 20%)
|
|
|
| | Franklin Tools Consumable Spare Kit AFT45/46 (10451) Ref: FR10451
Price: £27.64 (£33.17 Including: VAT at 20%)
|
OUT OF STOCK |
|
| | Franklin Tools Replacement Stud only AFT81/84 (10810) Ref: FR10810
Price: £10.03 (£12.04 Including: VAT at 20%)
|
|
|
| | Franklin Tools Consumable Spare Kit AFT81/84 (10811) Ref: FR10811
Price: £20.06 (£24.07 Including: VAT at 20%)
|
|
|
| | Franklin Tools Consumable Spare Kit AFT82 (10812) Ref: FR10812
Price: £20.06 (£24.07 Including: VAT at 20%)
|
|
|
| | Franklin Tools Consumable Spare Kit AFT83 (10813) Ref: FR10813
Price: £24.29 (£29.15 Including: VAT at 20%)
|
|
|
| | Franklin Tools Replacement Stud only AFT82 (10820) Ref: FR10820
Price: £10.03 (£12.04 Including: VAT at 20%)
|
|
|
| | Franklin Tools Consumable Spare Kit AFT85 (10851) Ref: FR10851
Price: £24.96 (£29.95 Including: VAT at 20%)
|
|
|
 | Franklin Tools Ball Joint Separator - Commercial (AC040) Ref: FRAC040
Ball Joint Separator - Commercial
For HGVs and commercial vehicles. Heavy duty heat treated drop forged steel body. Scissor action allows use where access is restricted.
36mm hexagon drive bolt - 70 mm jaw opening - 36 mm jaw width 44 mm jaw depth
Price: £82.00 (£98.40 Including: VAT at 20%)
|
|
|
 | Franklin Tools Coil Spring Compressor Set (AC2000) Ref: FRAC2000
Coil Spring Compressor Set
24mm hexagon drive. Supplied with three interchangeable sets of hardened jaws : 65 / 125 mm, 85 / 160 mm, 126 / 215 mm to cater for most major car / LCVs.
Alfa Romeo, Audi, BMW, Daewoo, Citroen, Chrysler, Daihatsu, Fiat, Ford, GM / Vauxhall, Honda, Hyundai, Kia, Lada, Lancia, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Rover, Saab, Seat, Skoda, Subaru, Suzuki, Toyota, Volvo, Volkswagen etc
2000 Kg maximum load - For struts and semi struts - easy to use to change springs and shock absorbers.
Price: £267.16 (£320.59 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Franklin Tools Coil Spring Compressor Mercedes (AC2010) Ref: FRAC2010
Coil Spring Compressor Mercedes
Enables coil springs to be replaced on the wishbone without dismantling the axle saving valuable time. A telescopic spring compressor, supplied with two pressure plate sizes, to cover a wide range of modern vehicles including:
Mercedes W123 W124 W126 W140 W202 W210 front axle and W107 W114 W115 W116 W123 W124 W126 W129 W140, W201 W202 W203 rear axle
Ford Focus - plus some Fiat GM / Opel Hyundai Mazda Mitsubishi Nissan Peugeot Rover Saab Toyota Volvo VW / Audi etc
Also suitable for multi-link independent suspension systems.
Price: £176.47 (£211.76 Including: VAT at 20%)
|
|
|
 | Franklin Tools Suspension Lever Tool (AFSL) Ref: FRAFSL
Suspension Lever Tool
Universal tool - allows suspension arm to be lowered to separate components
Adjustable sliding pivot point enables the tool to be adjusted for LH / RH use according to the layout / access available on the vehicle to be serviced.
Lever action reduces the effort required using body weight - allowing many jobs to be completed simply and safely by a single mechanic.
For use on a wide range of cars & LCVs
Price: £120.33 (£144.40 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Franklin Tools Ball Joint Tool - BMW 3 (E36) (AFT41) Ref: FRAFT41
Ball Joint Tool - BMW 3 (E36)
Professional Quality tool designed for use in-situ to remove & install press fit ball joints as used on
BMW 3 series (E36) control arms.
N.B. Only operate with a spanner / socket & ratchet - DO NOT USE WITH AIR IMPACT WRENCHES
Sample ball joint shown - but not included.
Price: £149.73 (£179.68 Including: VAT at 20%)
|
|
|
 | Franklin Tools Rear Bush Tool - BMW 5 (E39) (AFT45) Ref: FRAFT45
Rear Bush Tool - BMW 5 (E39) Saloon model only
The tool features a fine pitch thread and thrust bearing to enable the rear subframe bushes to be removed / inserted - without removing the rear subframe assembly from the vehicle.
Bush replacement tool for use on rear axle carrier bushes (33311091422) as used on BMW E39 5 series saloons.
.
Tool shown with a replacement subframe bush - NOT INCLUDED
Price: £164.89 (£197.87 Including: VAT at 20%)
|
|
|
 | Franklin Tools Rear Bush Tool - BMW 5 Touring (AFT47) Ref: FRAFT47
Rear Bush Tool - BMW 5 Touring
The tool features a fine pitch thread and thrust bearing to enable the rear subframe bushes to be removed / inserted - without removing the rear subframe assembly from the vehicle.
Bush replacement tool for use on rear axle carrier bushes (33311094036) as used on BMW 5 series Touring models (E38 / E39).
N.B. Not suitable for X5 or 5 series saloon models.
Tool shown with a replacement subframe bush - NOT INCLUDED.
Price: £217.47 (£260.96 Including: VAT at 20%)
|
|
|
 | Franklin Tools Rear Bush Tool - Ford Mondeo 2001 on (AFT83) Ref: FRAFT83
Rear Bush Tool - Ford Mondeo 2001 onwards
The tool features a fine pitch thread and thrust bearing to enable the rear subframe bushes to be removed / inserted - without removing the rear subframe assembly from the vehicle.
Bush replacement tool for use on rear subframe mounting bushes (1404976/7) as used on Ford Mondeo models - 2001 onwards.
Tool shown assembled with a replacement subframe bush - NOT INCLUDED.
Price: £81.11 (£97.33 Including: VAT at 20%)
|
|
|
 | Franklin Tools Sub-Frame Alignment Tool FORD (TA32) Ref: FRTA32
Sub-Frame Alignment Tool FORD
Ford Mondeo & Fiesta - 1996 on / Focus 1998 - 2004 where OEM tool 205-136 (15-097A) is specified.
Price: £33.93 (£40.72 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Franklin Tools Rear Bush Tool - Ford Focus (AFT91) Ref: FRAFT91
Rear Bush Tool - Ford Focus
Fine pitch thread with thrust bearing enables the rear wishbone / trailing arm bush to be removed / inserted - in situ.
1998-2004 - 1.4 1.6 1.8 1.8Di 1.8TDCi 2.0 16v RS ST170
Tool shown with sample bush - not included
Price: £151.51 (£181.81 Including: VAT at 20%)
|
|
|
 | Franklin Tools HD Extending Pry Bar 18"-30" (AT9760) Ref: FRAT9760
HD Extending Pry Bar 18"-30"
Indexable Head - quick release button allows the head to be set into the required position. Handle extends 18-30" / 46-76cm
Price: £30.30 (£36.36 Including: VAT at 20%)
|
|
|
 | Franklin Tools 10pc Ball Race Seal Driver (TA157) Ref: FRTA157
10 pce Ball Race Seal Driver
9 metal collars (40-81mm diameter) + handle
Price: £41.59 (£49.91 Including: VAT at 20%)
|
|
|
 | Franklin Tools FWD Wheel Bearing Tool Set (TA159) Ref: FRTA159
FWD Wheel Bearing Tool Set
For replacing wheel bearings on FWD cars and LCVs.
14 drive caps 51-89mm dia 4 extractor sleeves 69-92mm dia
Replacement drive screws are available
Price: £125.98 (£151.18 Including: VAT at 20%)
|
|
|
 | Franklin Tools Coil Spring Compressor (TA30) Ref: FRTA30
Coil Spring Compressor
For the stripping and replacement of Macpherson strut and standard coil springs. Double hook pattern.
Set of two, with drop forged arms. 1/2" sq dr / 13/16" A/F drive nut.
Only suitable for use on earlier vehicles.
For most current applications consider AC2000 or AC2010
Price: £19.14 (£22.97 Including: VAT at 20%)
|
|
|
 | Franklin Tools Ball Joint Separator 30-58mm 22mm (TA330) Ref: FRTA330
Ball Joint Separator 30-58mm 22mm jaw x 32mm depth
For cars and light commercial steering and suspension joints. Drop forged steel.
22mm jaw x 32mm depth. Two stage operation provides 30mm and 56mm maximum opening
Price: £21.92 (£26.30 Including: VAT at 20%)
|
|
|
 | Franklin Tools Ball Joint Separator 50-80mm 22mm (TA331) Ref: FRTA331
Ball Joint Separator 50-80mm 22mm Jaw x 32mm depth
Drop forged scissor action ball joint separator for car and light commercial ball joints, track rod ends etc.
Dual pivot points - range 50 - 80 mm. 22 mm Jaw x 32mm depth.
Price: £37.24 (£44.69 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Franklin Tools Ball Joint Separator Set - 3 pce (TA333) Ref: FRTA333
Ball Joint Separator Set - 3 pce
Forged steel body with hardened screw. Low profile design for use in confined spaces on a wide range of cars and LCVs.
23mm x 54mm 27mm x 54mm 34mm x 63mm
Audi Ford Chrysler Nissan Opel Saab Toyota Volkswagen Volvo
Price: £48.69 (£58.43 Including: VAT at 20%)
|
|
|
 | Franklin Tools Ball Joint Separator (45mm Adj) 23mm (TA335) Ref: FRTA335
Ball Joint Separator 23mm Jaw 45mm Adjustment
Drop forged direct action ball joint separator for car and light commercial ball joints, track rod ends etc.
Screw adjustment range 45 mm. 23 mm Jaw.
For smaller ball joints the use of our TA334 Ball Joint Separator is recommended
Price: £21.40 (£25.68 Including: VAT at 20%)
|
|
|
 | Franklin Tools Ball Joint Separator 12" Fork 19mm (TA338) Ref: FRTA338
Fork Ball Joint Separator 16" 18mm Jaw - 400mm long
Extra long drop forged ball joint separator for car and light commercial ball joints, track rod ends etc.
WARNING : FORK TYPE SEPARATORS SHOULD NOT BE USED IF THE BALL JOINT IS TO BE RE-ASSEMBLED AS THE BALL JOINT RUBBER MAY BE DAMAGED
400 mm long - 18 mm Jaw.
Price: £6.68 (£8.02 Including: VAT at 20%)
|
|
|
 | Franklin Tools 5pc Strut Nut Tool Set VAG (TA3515) Ref: FRTA3515
5 pce Strut Nut Tool Set VAG
Designed to hold the damper shaft during the re-fitting and removal of the strut nuts.
VW / Audi - 10.5 12.5 14.5 14.5 Mercedes W203 / W209 - 14.0
22mm hexagon drive
Price: £11.66 (£13.99 Including: VAT at 20%)
|
|
|
 | Franklin Tools CVB Clip Crimping Pliers (TA574) Ref: FRTA574
CV Boot Clip Crimping Pliers
For use on metal ear type clips as used on front wheel drive CV joint boots.
Price: £13.89 (£16.67 Including: VAT at 20%)
|
|
|
 | Franklin Tools CV Boot Clip Snips (TA575) Ref: FRTA575
CV Boot Clip Snips
Price: £20.53 (£24.64 Including: VAT at 20%)
|
|
|
 | Franklin Tools Suspension Bush Tool - Vectra (TA991) Ref: FRTA991
Suspension Bush Tool - Vectra B
Allows upper and lower damping bushes (OEM # 90496700) to be replaced in situ - without removing the rear trailing arm assembly.
GM Opel / Vauxhall Vectra B 1.6 1.8 2.0 (1995 onwards) & 2.5 (1996 onwards)
Consumable spares kit (2 drive stud & hexagon nuts) # 19912
Price: £37.58 (£45.10 Including: VAT at 20%)
|
|
|
 | Franklin Tools Pivot Bush Tool - Peugeot 406 (TA992) Ref: FRTA992
Pivot Bush Tool - Peugeot 406
Allows the outer pivot bush to be replaced in situ without removing the rear suspension lower arm or stub axle from the vehicle.
Peugeot 406 1.8 1.9 2.0 (1996 onwards)
Price: £37.58 (£45.10 Including: VAT at 20%)
|
|
|
 | Franklin Tools Suspension Bush Tool - Mondeo (TA994) Ref: FRTA994
Suspension Bush Tool - Mondeo
Allows the rear suspension knuckle / tiebar damping bush to be replaced in situ without removing the assembly from the vehicle.
Price: £37.58 (£45.10 Including: VAT at 20%)
|
|
|
 | Franklin Tools Workshop Bush Adaptor Set (AFT800) Ref: FRAFT800
Workshop Bush Adaptor Set
Workshop tool set for extracting / installing suspension bushes, bearings, seals etc
20 Adaptors : 34 - 72 mm (internal diameter range) x 50 mm (internal depth) 44 - 82 mm (external diameter range) x 60 mm
4 Studs : M10 x 350mm (17mm Hexagon) M12 x 350mm (19mm Hexagon) M14 x 350mm (21mm Hexagon) M16 x 350mm (24mm Hexagon) Replacement consumable drive stud sets are also available
A versatile combination of adaptors and threaded studs with thrust bearings to assist with a wide range of routine service operations - as required on cars and light commercials
Price: £280.75 (£336.90 Including: VAT at 20%)
|
|
|
| | Franklin Tools Service Kit for TA991 (SCM440) (19912) Ref: FR19912
Price: £13.71 (£16.45 Including: VAT at 20%)
|
|
|
| | Franklin Tools Service Kit for TA992 (19921) Ref: FR19921
Price: £13.71 (£16.45 Including: VAT at 20%)
|
|
|
 | Franklin Tools Front Bush Tool - BMW Mini 2001 on (AFT49) Ref: FRAFT49
Front Bush Tool - BMW Mini 200
For replacing 66mm diameter bush (OEM # 31126757551 or equivalent) on lower control arms (# 31125757561/2)
R50, R52, R53 (Mini Cooper) (W10, W17, W11), R55 R56.
Also suitable for installing polyurethane compound bushes e.g. Powerflex®
Tool shown with OEM bush - NOT INCLUDED.
Price: £86.89 (£104.27 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Franklin Tools Front Arm Bush Tool - VW Polo Mk 7 (AFT85) Ref: FRAFT85
Front Arm Bush Tool - VW Polo III Skoda Fabia / Seat models
Fine pitch thread with thrust bearing enables the rear bush to be removed from the front track control arm on 11 / 2001 onwards
VW Polo III / Skoda Fabia / Seat
Replacement bush shown but not included.
Price: £114.98 (£137.98 Including: VAT at 20%)
|
OUT OF STOCK |
|
 | Franklin Tools Rear Axle Bush Tool - Audi A4 (AFT86) Ref: FRAFT86
Rear Axle Bush Tool - Audi A4
For replacing the rear axle beam mounting (OEM # 8D050141D 01/1995 on
Audi A4 1.6 1.8 1.8T 1.8T 1.9Di 1.9TDI 2.4 2.5TDI 2.6 2.7T 2.8 S4 - 01/1995 on Audi A4 Avant - 07/ 1995 on (except 1.9 DUO).
Tool shown with OEM bush - not included
Price: £106.95 (£128.34 Including: VAT at 20%)
|
|
|
 | franklin Tools Rear Bush Tool - Jaguar X-type (AFT92) Ref: FRAFT92
Rear Bush Tool - Jaguar X-type
For replacing the rear hub carrier - front bush (OEM # C2S46380) on Jaguar X-Type models - 2001 on
Tool shown with OEM bush - not included
Price: £71.30 (£85.56 Including: VAT at 20%)
|
OUT OF STOCK |
|
| | Franklin Tools Ball Joint Separator (35mm Adj) 18mm (TA334) Ref: FRTA334
Ball Joint Separator 18mm Jaw 35mm Adjustment
Drop forged direct action ball joint separator for car and light commercial ball joints, track rod ends etc.
Screw adjustment range 35 mm. 18 mm Jaw.
For larger ball joints the use of our TA335 Ball Joint Separator is recommended
Price: £18.44 (£22.13 Including: VAT at 20%)
|
|
